Quick Start
WiBox2100E User Guide
21
Two settings are required for the WiBox to communicate on a wireless network:
The Server (0) settings
The WLAN (4) settings
Current settings display in parentheses.
Note:
Due to regulations, the country-specific setting has been removed from the
setup menu and Web-Manager. We provide a separate utility for changing the
Country/Zone setting. The utility is called SetZone and is included in the WiBox
package. It is also available for download from the Lantronix web site.
The syntax is
SetZone <IP address> [<zone abbreviation>]
Leaving the zone blank causes the utility to report the current setting only. Following
are valid zone abbreviations. These settings are consistent with IEEE802.11b/g
zones:
US=United States
CA=Canada
FR=France
SP=Spain
JP=Japan
OT=Others, such as Europe
(excluding France), Asia, Africa,
and Australia
6. To configure the Server settings, select
0
from the
Change Setup
menu and edit
the following fields:
a)
IP Address:
The IP address must be set to a unique value in the network.
Enter each octet and press
Enter
between each section.
IP Address: IP Address : ( 0) ( 0) ( 0) ( 0) _
b)
Set Gateway IP Address:
The gateway address should be the IP address of
the router connected to the same LAN segment as the WiBox unit.
Set Gateway IP Address (N) ? Y
Gateway IP addr ( 0) ( 0) ( 0) ( 0)_
c)
Netmask:
A netmask defines the number of bits taken from the IP address
that are assigned for the host part.
Netmask: Number of Bits for Host Part (0=default)(0)_
d)
Change Telnet Configuration Password:
Change the Telnet configuration
password to prevent unauthorized access to the Change Setup menu and
Web-Manager.
Change telnet config password (N) ? _
e)
Change DHCP Device Name:
Change the DHCP name if the network is
DHCP-enabled.
Change DHCP device name (not set) ? (N) N
Enter new DHCP device name :
7. To modify WLAN settings, select
4 WLAN
from the Change Setup menu and edit
the following fields:
a)
Enable WLAN:
Enable the Ethernet or the Wireless interface. When WLAN
is enabled, the Ethernet interface is disabled.
Enable WLAN (Y) ? _
