Lantronix EPS4-100, Installation Manual

Page: 93 / 114

Frequently-used Commands
M - 1
M - Frequently-used Commands
This appendix lists some of the most frequently-used commands of the Print Server command set.
More information about the command set, including additional options, can be found in the
Print
Server Reference Manual on the CD-ROM.
Please note the following before continuing:
„
Commands are divided into Server (general), Port, and Protocol sections.
Within each section, commands are listed alphabetically.
„
Commands may require privileged user status. Enter
Set Privileged
,
then enter the privileged password when prompted.
„
When you enter a Define or Purge command, you must reboot the Server
for the command to take effect.
„
When the abbreviated syntax "
{EN|DIS}
" is shown, you must choose
either Enabled or Disabled to complete the command.
„
When nn is shown, enter a single port number, a list of port numbers sepa-
rated by commas, a range of port numbers separated by dashes, or the word
all .