Lantronix EPS4-100, Installation Manual

Page: 83 / 114

Updating Software
K - 7
K.4.2 NetWare
The EPS.SYS file should be placed in the login directory on the NetWare file server. The Server
cannot actually log into the file server (since it knows no username/password); it can only access
files in the login directory itself. On the Server, specify the file server name, filename, and path.
K.4.3 TCP/IP
Before the Server downloads the new software, it will send DHCP, BOOTP, and/or RARP queries
(BOOTP and RARP queries are enabled by default). Next, the Server will attempt to download
the EPS.SYS file using TFTP (Trivial File Transfer Protocol).
If a host provides DHCP, BOOTP, or RARP support, it can be used to set the Server's IP address
(all) and loadhost information (BOOTP and RARP only). Add the Server's name, IP address,
Local> SET PRIVILEGED
Password> SYSTEM (not echoed)
Local>> DEFINE SERVER NETWARE LOADHOST
fileserver
Local>> DEFINE SERVER SOFTWARE SYS:\LOGIN\
EPS.SYS
Local>> INITIALIZE RELOAD