manualshive.com logo in svg

Lantronix EPS4-100, Installation Manual

Share
Download
Lantronix EPS4-100 Installation Manual Download Page 42

NetWare Configuration

5 - 2

5.1 Obtaining an NDS License

If you wish to create NDS print queues, you must read and complete an NDS registration form via 
one of the following methods:

„

Using a forms-capable Internet browser, navigate to the Lantronix World Wide Web 
site (located at URL 

http://www.lantronix.com

) and find the 

NDS Registration

 link.

„

Send email to 

[email protected]

. You will receive a blank registration form 

that can be completed and returned to Lantronix. 

„

If you don’t have Internet access, contact a Lantronix Technical Support representa-
tive for assistance. Contact information is provided in 

Appendix A -

.

1.

License NDS on your server using the string obtained from Lantronix.

2.

Define the directory service tree in which the Server is located.

NOTE:

For an explanation of the structure of the NetWare Directory Service 

Local>> DEFINE PROTOCOL NETWARE DSLICENSE licensestring

Local>> DEFINE PROTOCOL NETWARE DSTREE foodco

Summary of Contents for EPS4-100



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands