Lantronix EPS2-100 Installation Manual Download

Page: 44 / 114

NetWare Configuration

5 - 4

To create a print queue with the Quick Setup option.

NOTE:

NetWare Administrator can be used for both NDS and bindery print queues.

Start NetWare Administrator.

In the

Directory Tree

windows, select the context in which to install the printer.

From the Menu Bar, select

Tools: Print Services Quick Setup

In the

Print Server Name

field, enter the name of your Lantronix server (viewable by

entering the

Show Server

command at the Local> prompt).

In the

Printer Name

field, enter the name of the desired print

service

configured on your

Lantronix server.

In the

Print Queue Name

field, enter the name of the print queue to create. The name

should be meaningful to you; it will not affect Server configuration.

Click

Create

Reboot the EPS.

Summary of Contents for EPS2-100



















































































































Search results

Summary of Contents for EPS2-100

Reviews:

Related manuals for EPS2-100

Brands by name

Popular brands

Lantronix EPS2-100, Installation Manual

Search results

Summary of Contents for EPS2-100

Reviews:

Related manuals for EPS2-100

Brands by name

Popular brands