manualshive.com logo in svg

Lantronix EPS2-100, Installation Manual

Share
Download
Lantronix EPS2-100 Installation Manual Download Page 14

Getting Started

3 - 2

3.1 EZWebCon Configuration

The EZWebCon configuration software is the recommended way to configure the EPS. 
EZWebCon is a graphical user interface that guides first time users through the initial 
configuration process and allows experienced users to update and change any configurable 
parameters. There are two important things to note about EZWebCon:

„

Your Server must have an IP address before EZWebCon can log into it for configura-
tion purposes. See 

Setting the IP Address

 on page 4-2 for instructions.

„

EZWebCon requires a Java Virtual Machine (JVM) on the client. Lantronix provides 
JVM installers for Solaris and 32-bit Windows users, as well as source code and 
instructions for compiling it for use on other systems.

The EZWebCon software is located on the distribution CD-ROM. All instructions for installing 
EZWebCon are provided in the README file. For assistance once EZWebCon is running, refer to 
the EZWebCon on-line help. 

NOTE:

EZWebCon is also available from the Lantronix FTP and BBS servers. 
See 

Appendix D

 for more information about logging into the FTP and 

BBS servers.

Summary of Contents for EPS2-100



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands