7: Network, Line, Tunnel, and Terminal Settings
EDS Device Servers User Guide
75
Login Connect Menu
An administrator can set up a menu on the EDS for terminal users.
For a terminal attached to serial Line N, set as follows:
Line[N] Protocol
= None
Line[N] Command Mode
= Always
Terminal[Line N] Login Connect Menu
= Enabled.
For Telnet-attached terminals, set:
Terminal [Network] Login Connect Menu
= Enabled.
The terminal user will see a menu roughly like this:
Password :
Connection menu: (select by number)
1) Alpha 2) Beta
3) Exit to command line interface 4) Log out
Selection =
The administrator adds destination serial line M to the menu by filling in
Line[M] Name
.
For this purpose, set:
Line[M] Protocol
= None
Line[M] Command Mode
= Disabled.
The administrator adds a network destination to the menu by setting up a
Host
entry for
it. Each named
Host
entry will appear in the menu.
The administrator adds the
Exit to command line interface
choice to the menu by
setting:
Terminal[Line N]
or
Terminal[Network] Exit Connect Menu
= Enabled.
The
Log out
choice is always present.
Summary of Contents for EDS16PR
