Firmware
UDS-10 User Guide
4-5
4. In
the
Destination File
field, enter the
current
internal operational code or
WEB5
for
the internal Web interface. (For UDS-10-IAP, AQ = Standard Tunnel, AM = Modbus,
AD = DF1. For UDS-10, 3Q = Standard Tunnel)
5. In
the
Remote Host
field, enter the IP address of the unit being upgraded.
6. Click
the
Put
button to transfer the file to the unit.
Figure 18 - TFTP Dialog Box
The unit performs a power reset after the firmware has been loaded and stored.
4.2.3 Via Another Unit
To distribute firmware to another unit over the network:
1. Enter the host unit's Monitor Mode (see
Monitor Mode
on page 7-1).
2. Send the firmware to the receiving unit using the
SF
command, where x.x.x.x is the
receiving unit's IP address.
SF x.x.x.x
The receiving unit performs a power reset after the firmware has been loaded and stored.
Note:
You can only update your unit 's internal Web interface using TFTP or Device
Installer.
