Lantech LPES-2208CA, User Manual

Page: 78 / 135

71
Port Statistics
The following chart provides the current statistic information which displays the
real-time packet transfer status for each port. The user might use the information to
plan and implement the network, or check and find the problem when the collision or
heavy traffic occurs.

Port: The index column of the ports.

Type: Displays the connection media type of the port.

Link: The status of linking
—‗
Up
‘ or ‗
Down
‘.

State: The user can set the state of the port as
‗Enable‘ or ‗Disable‘ via the
Port
Control interface the next function. When the state is disabled, the port will not
transmit or receive any packet.

Tx Good Packet: The counts of the transmitted good packets via this port.

Tx Bad Packet: The counts of the transmitted bad packets (including undersize
[less than 64 bytes], oversize, CRC Align errors, fragments and jabber packets)
via this port.

Rx Good Packet: The counts of the received good packets via this port.

Rx Bad Packet: The counts of the received bad packets (including undersize
[less than 64 bytes], oversize, CRC Align error, fragments and jabber packets) via
this port.

Tx Abort Packet: The aborted packet while transmitting.

Packet Collision: The counts of collision packet.

Packet Dropped: The counts of dropped packet.

Rx Bcast Packet: The counts of broadcast packet.

Rx Mcast Packet: The counts of multicast packet.

Click
Clear
to clean all counts.