Lantech LPES-2208CA, User Manual

Page: 128 / 135

121
is within the window of the PD signatures, the device is considered to be discovered.

Start: Showing with a tick symbol, the system initializes and resets successfully.

And then, click
Apply
to carry into effect.

Port: The index of PoE ports.

Enable State: Check it to enable the PoE function to the port.

Power Limit From: Check it to decide the power limit method.

Classification : When this check box is ticked, the system will limit the power
supply to the powered device in accordance with the related class.

Legacy:
Check it to support the legacy power devices.

Priority: Pull down the selection menu item to choose the priority of power
supplying.

Port Limit (<15400) mW: User can key in the power limit value which is under 15.4
Watts.

Mode:
Displays the operating mode of the port.

Current (mA):
Displays the operating current of the port.

Voltage (V): Displays the operating voltage of the port.

Power (mW): Displays the power consumption of the port.

Determined Class:
Displays the PD
‘s class.

And then, click
Apply
to carry into effect.