Lantech LPES-2208CA, User Manual

Page: 50 / 135

43
systemlog
no event smpt I Disable port event for
SMTP
switch(config)# interface
fastethernet 3
switch(config-if)# no event smtp
SNTP Commands Set
Commands Level Description Example
sntp enable G Enable SNTP function switch(config)# sntp enable
sntp daylight G Enable daylight saving
time, if SNTP function
is inactive, this
command can
‘t be
applied.
switch(config)# sntp daylight
sntp daylight-period
[Start time] [End time]
G Set period of daylight
saving time, if SNTP
function is inactive,
this command can
‘t be
applied.
Parameter format:
[yyyymmdd-hh:mm]
switch(config)# sntp
daylight-period 20060101-01:01
20060202-01-01
sntp daylight-offset
[Minute]
G Set offset of daylight
saving time, if SNTP
function is inactive,
this command can
‘t be
applied.
switch(config)# sntp
daylight-offset 3
sntp ip
[IP]
G Set SNTP server IP, if
SNTP function is
inactive, this command
can
‘t be applied.
switch(config)# sntp ip 192.169.1.1
sntp timezone
[Timezone]
G Set timezone index,
use
‗show sntp
switch(config)# sntp timezone 22