Lantech LPES-2208CA, User Manual

Page: 69 / 135

62
System Event Log
—Event Configuration
Having ticked the Syslog / SMTP checkboxes, the event log/email alert will be sent to
the system log server and the SMTP server respectively. Also, Port event log/alert (link
up, link down, and both) can be sent to the system log server/SMTP server
respectively by setting the trigger condition.

System event selection: There are 3 event types
—Device Cold Start,
Authentication Failure, and X-ring Topology Change. The checkboxes are not
available for ticking unless the Syslog Client Mode on the Syslog Configuration
tab and the E-mail Alert on the SMTP Configuration tab are enabled first.

Device cold start: When the device executes cold start action, the system
will issue the event log/email alert to the system log/SMTP server
respectively.

Authentication Failure: When the SNMP authentication fails, the system will
issue the event log/email alert to the system log/SMTP server respectively.

X-ring topology change: When the X-ring topology has changed, the
system will issue the event log/email alert to the system log/SMTP server
respectively.

Port event selection: Also, before the drop-down menu items are available, the
Syslog Client Mode selection item on the Syslog Configuration tab and the
E-mail Alert selection item on the SMTP Configuration tab must be enabled first.
Those drop-down menu items have 3 selections
—
Link UP , Link Down , and Link
UP & Link Down . Disable means no event will be sent to the system log/SMTP
server.

Link UP: The system will only issue a log message when the link-up event of
the port occurs.

Link Down: The system will only issue a log message when the link-down
event of port occurs.

Link UP & Link Down: The system will issue a log message at the time when
port connection is link-up and link-down.