55
System Reboot
Reboot the switch in software reset. Click
Reboot
button to reboot the switch.
System Reboot interface
Rate Control
Set up every port’s bandwidth rate and packet limitation type.
Limit Packet type:
select the packet type that wants to filter. The packet
types have all type packet, broadcast/multicast/unknown unicast packet,
broadcast/multicast packet, and broadcast packet only. The
broadcast/multicast/unknown unicast packet, broadcast/multicast packet,
and broadcast packet only are only for ingress packet. The egress rate only
supports all type packets.
Band Width:
The port1 ~ port 8, supports port ingress and egress rate
control. For example, assume port 1 is 10Mbps, users can set it’s effective
egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the
ingress rate by packet counter to meet the specified rate.
¾
Ingress:
select the port effective ingress rate. The valid range value is
1MB, 2MB, 4MB, 8MB, 16MB, 32MB and 64MB. The default value is
“disable”.
¾
Egress:
select the port effective ingress rate. The valid range value is
128kbps, 256Kbps, 512Kbps, 1MB, 2MB, 4MB, and 8MB. The default
value is “disable”.
Click
Apply
button to apply the configuration.
