24
bytes.
System Location:
Assign the switch physical location. The maximum
length is 64 bytes.
System Description:
Display the description of switch. Read only cannot
be modified.
Firmware Version:
Display the switch’s firmware version.
Kernel Version:
Display the kernel software version.
Hardware version:
Display the switch hardware version.
MAC Address:
Display
the unique hardware address assigned by
manufacturer (default)
Switch settings interface
[NOTE]
Remember to execute the “Save Configuration” action, otherwise the
new configuration will lose when the switch power off.
Port Mirroring
The Port mirroring is a method for monitor traffic in switched networks. Traffic
through ports can be monitored by one specific port. That is, traffic goes in or
out monitored ports will be duplicated into mirror port.
1.
Port Mirroring Mode:
set mirror mode -- Disable, TX, and Both. The
default is “Disable”.
