© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
September 16 - Version 2
Aurora Polaris V2 Owner Handbook™
SPECIAL EFFECTS:
(1) Press ENTER again to set the BRIGHTNESS of your chosen static colour. This is from 000
(off) to 255 (full brightness)
(2) Press ENTER again for FLASH mode. “FS00” is static through to “FS99”, the fastest flash
rate of your chosen static colour.
Program “PR02” to “PR10” are pre-programmed patterns that either colour switch or
colour fade. After selecting the desired pattern, the special effects shown in (1) and (2)
can be selected.
Note: Special effect (1) on channels PR02 to PR10 represent the speed of the colour
change, not the brightness
2- AUTO Mode
To use the built-in Auto mode – a library of exciting colour changes, keep pressing the
“MODE” button until the LED display shows “AUTO”. In this mode the unit will run pattern
two for a period of time, then automatically run pattern three and so on until pattern ten
is reached. It will then restart with pattern two. This creates an ever-changing light show
without the need for the operator to intervene.
