© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
September 16 - Version 2
Aurora Polaris V2 Owner Handbook™
Operating Modes
To select the various different modes of operation, there is a 4 button keypad and a 4
digit LED display on the rear of the product.
To begin, press the button marked “MODE”. Each press will choose one of the working
modes described below. Once the desired mode has been selected, the button marked
“ENTER” will allow the user to select a parameter that they wish to change (such as speed
etc). To choose a value of the parameter, press either the “UP” or “DOWN” buttons until
the desired setting is achieved.
Note: There is no need to have a “store” button, as this is automatically done for you.
Note: The LED display will enter power saving mode after 20 seconds after the last button
press. It will turn on again after pressing any button.
Note: When first powered on, the display will briefly show the firmware version programmed
into the memory of the controller. This is displayed as a “U” followed by the version number.
(e.g. “U3.01”)
1- Built-in PROGRAM Mode
To use the built-in program mode – a library of exciting and vibrant colour changes, keep
pressing the “MODE” button until the LED display shows “PR” followed by a 2-digit number
(e.g. PR07). The “UP” and “DOWN” buttons allow the selection of a program.
Program 01 is a static colour mode. By pressing “ENTER” on this program, the
desired colour can be selected by using the “UP” and “DOWN” buttons. There are
seven static colours:-
1- Red (Red)
2- Red & Green (yellow)
3- Green (Green)
4- Green & Blue (Cyan)
5- Blue (Blue)
6- Red & Blue (Magenta)
7- Red & Green & Blue (White)
8- Off
