© Lanta Lighting™ 2016. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
September 16 - Version 2
Aurora Polaris V2 Owner Handbook™
3- DMX Mode
It is possible to operate the Lanta Aurora Polaris™ from a remote location by using either
a DMX controller or a PC or laptop with a DMX interface. Lanta products use a 3 pin XLR
style connector and usually have an input and output DMX connector. This allows multiple
lighting products to be “daisy-chained” together to build a display controlled by just one
cable back to the DMX controller.
NOTE: In larger installations, there may be limitations regarding the maximum length of
DMX cables and the maximum number of devices that can be used in one daisy-chain
(or node).
NOTE: It is often desirable to terminate the last device on the node to minimize noise
and interference. Interference on a DMX network can make some lighting products to
behave erratically; this is most noticeable with moving head or other motorized products.
This is not a fault with the lighting product.
Please see the handbook for DMX controller for further details.
DMX Mode 1: 1 Channel
CH1
No.
DMX Value
Function
1
0
Off
2
3-23
Red
3
23-45
Green
4
46-68
Blue
5
69-91
Cyan
6
92-114
Yellow
7
115-137
Orange
8
138-160
Pink
9
161-183
Purple
10
184-206
Dark Blue
11
207-229
Light Green
12
230-252
White
13
253-255
Warm White
