7 6
3
BIOS Setup
ACPI Function
By default, the ACPI function is enabled. This function should be
enabled only in operating systems that support ACPI.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS)
Enables the Power On Suspend function.
S3(STR)
Enables the Suspend to RAM function.
Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the “ACPI Suspend Type” field is set to “S3(STR)”. When this feature
is disabled, the system resume time is shortened but system will
need an AGP driver to initialize the VGA card. Therefore, if the AGP
driver of the card does not support the initialization feature, the
display may work abnormally or not function after resuming from S3.
Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the HDD
Power Down field is activated.
Min Saving
Minimum power saving time for the HDD Power
Down = 15 min.
Max Saving
Maximum power saving time for the HDD
Power Down = 1 min.
User Define
Allows you to set the power saving time in the
“HDD Power Down” field.
Summary of Contents for X58-T3EH6
Page 1: ...System Board User s Manual...
