25
2
Hardware Installation
1
2. Place the heat sink on
top of the CPU. The 4
push-pins around the
heat sink, which are used
to secure the heat sink
onto the system board,
must match the 4
mounting holes around
the socket.
Mounting hole
4. Rotate each push-pin
according to the
direction of the arrow
shown on top of the
pin.
Push down two push-
pins that are diagonally
across the heat sink..
Perform the same
procedure for the other
two push-pins.
“Unlocked”
position of
push-pin
“Locked” position
of push-pin
3. Orient the heat sink
such that the CPU fan’s
cable is closest the CPU
fan connector.
1
CPU fan
connector
Summary of Contents for X58-T3EH6
Page 1: ...System Board User s Manual...
