Lanier 5722 Operator'S Manual Download

Page: 47 / 173

10. BYPASS COPYING (THICK PAPER/OHP FILM) (Cont.)

Thick Paper

Tips:

●

Use the recommended thick paper and sticker

labels if possible. Thick paper sold at stores
is also available for this copier, but paper of
some brands may not be suitable to acquire
a clear image. In this case, ask your service
technician.

●

Due to the image quality adjustment, it takes

a few minutes to switch between "PLAIN" X
"Full Bleed (12"X18")" X "OHP FILM" X
"THICK1" and "THICK2" X "THICK3".

Check the type of the thick paper and press

the THICK1 , THICK2 or THICK3 key.

Tips:

●

For bypass copying mode for thick paper and

sticker labels, see the table on page 19.

●

The thick paper mode cannot be combined

with Full Bleed (12"X18") mode.

Summary of Contents for 5722














































































































































































Search results

Summary of Contents for 5722

Reviews:

Related manuals for 5722

Brands by name

Popular brands

Lanier 5722, Operator'S Manual

Search results

Summary of Contents for 5722

Reviews:

Related manuals for 5722

Brands by name

Popular brands