Lanier 5722 Operator'S Manual Download

Page: 28 / 173

HOW TO

MAKE

COPIES

Copying in the Continuous Feed Mode

1
2

Press the ADF key on the panel to select

continuous feed.

●

ADF is highlighted and selected as the default
feed mode.

●

The panel returns to the original display.

Slides

Press the PROGRAM key on the display

panel.

Press the ADF key.

Select the desired copy size, reproduction

ratio, image density level and copy quantity.

●

The automatic paper selection mode is
selected as the default mode.

Place the originals on the original feed tray.

●

After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.

Press the START key.

●

The originals are fed starting with the
lowermost one.

Holder

●

For setting Ledger or Legal sized paper, pull
out the paper holder in the direction of the
arrow.

Summary of Contents for 5722














































































































































































Search results

Summary of Contents for 5722

Reviews:

Related manuals for 5722

Brands by name

Popular brands

Lanier 5722, Operator'S Manual

Search results

Summary of Contents for 5722

Reviews:

Related manuals for 5722

Brands by name

Popular brands