Lanier 5635, Operator'S Manual

Page: 252 / 288

Can Not Make Proper Copies
9 - 26 Service and Supplies
Can Not Make Proper Copies
General
Adjust Image
Problem Cause Action
Copies are not stapled. The stapler is jammed. Remove the jammed staples.
The number of copies exceeds
teh capacity of the stapler.
Check the stapler capacity.
Copy paper is curled. Turn the copy paper over inthe
paper tray.
Staples are not positioned
correctly.
Originals are not set correctly. Place the original on the upper
left corner of the exposure
glass.
Misfeeds occur frequently. Copy paper size setting is not
correct.
Set theproper paper size.
You cannot combine several
functions.
Selected functions cannot be
used together.
Check combination functions.
When sorting the pages are
divided into two blocks.
The memory became full in the
middle of sorting and the pages
were ejected in two blocks.
You can interrupt the copying
when the memory becomes full.
Problem Cause Action
In Double Copy mode, parts of
the original image are not
copied.
Combination of original and
copy paper is not correct.
Select proper paper.
In Border, Center, or Center/
Border modes, parts of the
origianl image are not copied.
Wide erase margins are set. Set narrow margins.
Orignals ar not scanned
correctly.
In Margin Adjustment mode,
parts of the original image are
not copied.
Wide erase margins are set. Set narrow margins.
There is a lack of margin space
on the oppossite side of the
binding position.
In Image Repeat mode, the
orignal image is not copied
completely.
You selected the same size copy
paper as the originals and did
not select theproper
reproduction ratio.
Delect copy paper larger than
the origianls.
Select the proper reproduction
ratio.