Lanier 5635, Operator'S Manual

Page: 232 / 288

Adding Toner
9 - 6 Service and Supplies
Adding Toner
1
Open the Front Cover.
2
Pull out on the handle on the Toner Bottle
Holder until the Toner Bottle holder is fully
opened.
3
Pull the green lever and gently pull the Toner
Bottle out.
The Add Toner Indicator turns ON when toner is needed. If copying is continued while the
Toner Indicator is ON, copies will gradually become lighter until the copier stops and the Add
Toner Indicator begins flashing.
The Add Toner Indicator may also begin flashing during long copy runs of multiple dark
originals, even though there is toner left. Should the Add Toner Indicator begins to flash, the
copier stops making copies. Open and close the Front Cover. When sufficient toner has been
fed, the Add Toner Indicator turns OFF and the Ready Indicator in the Start key turns ON. Press
the Start key to resume copying.
For best copying results, use only Lanier supplies which are designed, engineered, and tested to
maximize the life and performance of Lanier copiers.