7
1.
Collect the following items
(2) Stabilizers
(4) 4-40 x 1/2” Button Head Bolts
(1) Short Front Stabilizer Tube
(1) Long Rear Stabilizer Tube
MOUNTING STABILIZERS
1.
Locate the two holes under the stabilizer
tubes in the fuselage.
Remove the covering over both screw holes.
2.
Slide the short stabilizer tube into the front
hole in the fuselage.
Insert the long stabilizer tube in the rear hole
of the fuselage.
Using the 4-40 x 1/2” button head screws to
fasten the stabilizer to the fuselage side.
Note: Always use thread lock on these screws
before flying
3.
Repeat for the other side of the stabilizer.
TAIL WHEEL ASSEMBLY
1.
Collect the following items
(2) Springs
(4) 1/8 Adjustable Horn Brackets
(1) Tail Wheel Bracket
(1) Tail Wheel Axle
(1) Tail Wheel
(1) Wheel collar with Set Screw
(2) 6-32 all threaded short shafts
(2) Brass Tail Wheel Axle Supports with Set
Screws
1.
Locate the tail wheel axle and one of the brass
tail wheel supports with only one threaded
hole.
Insert the axle through the brass tail wheel
support and tighten the set screw like shown
above.
Note: Use thread lock on the set screw.
Insert the axle shaft through the hole on the
tail wheel bracket.
