12
Wheel Collars
Wheel Pant
Wheel
Landing Gear
5.
Mount the wheel pants back on the landing
gear along with the wheel collars and wheels.
Center the wheel on the axle.
ENGINE INSTALLATION
The Motor you choose may have a different
type installation as show. We show a Desert
Aircraft DA50 motor. This motor has more
than enough power to make this plane per-
form to its limits.
If you choose a more powerful motor
then you must make sure that you go over
all high stress joints with a white glue or a
epoxy.
Because of the size of propellers used
in these type of engines any kind of prop
strike on the ground, or any other type of
object, can cause structural damage that
might not be easily visible. When a accident
occurs you must check for damage thought
out the plane before flying. This damage can
cause airframe failure at any time, so inspec-
tions must be thorough.
We will not warranty any structural failures
do to neglect or accidents.
1.
You will find both the horizontal and vertical
lines marked on the firewall.
The vertical line is off set to compensate for
the 2 degrees right thrust.
Mark your motor mount location from these
marks.
The front of the prop drive washer needs to
be 6-1/4” away from the firewall.
Caution:
Always use thread lock on any bolt
that is threading into metal threads.
