5
3.
Attach the 18” servo extension to the outer
servo.
IMPO
RTANT!
To ensure that any connections locat-
ed inside the wing will not come loose, either when
the wires are pulled, or during flying,
always tape
them securely together with electrical tape.
4.
Starting from the outer servo hole, insert the
servo extension and the servo wire into the
servo hole
.
Allow the wire to fall straight down through
though the wing till it exits the root rib.
5.
Tape the end of the plug to the root rib
.
Mount the inner aileron servo into the wing.
Aileron
6.
Pull the second servo wire out of the wing root
rib.
Plug the two aileron servos into a “Y” harness.
Always tape them securely together with
electrical tape.
Repeat for the other wing half.
AILERON CONTROL HORN INSTALLATION
1.
Collect the following items
(8) 4-40 Metal Clevis
(8) 4-40 Hex Nut
(4) Clevis Clip
(4) 4-40 x 3-1/4" Double Threaded Wire
(4) 6-32 x 2-1/4” 3mm socket head bolt
(4) Nylon Adjustable Control horns
(4) Nylon Nut
(4) Nylon Cup Washer
CONTROL HORN PART NAMES
Nylon Adjustable Control Horn
6-32 x 2-1/4” Allen head Bolt
Nylon Nut
Nylon Cup Washer
Wing Tip
