13
2.
The motor we used was mounted on pillars off
of the firewall the proper distance (6-1/4”
total). You might need to shim your motor out
farther.
We also had to open the fuel tank hole in the
firewall because the DA 50 carburetor needs
“breathing room” to function properly. This
hole allows the carburetor to breath through
the firewall into the fuselage.
Remove for carbu-
retor breathing
2.
The ignition box was mounted below where
the fuel tank will be placed.
FUEL TANK
Note:
The fuel tank must be designed for gas if
you are using a DA50.
1.
Construct your fuel tank.
Using Rubber bands or velcro©, strap the fuel
tank to the tray.
2.
Using #2 x 5/16 screws,
Install the fuel tank
tray in front of the fiberglass wing tube.
Install the fuel line line for your motor.
