Turn of the Century
TM
5
ASSEMBLY INSTRUCTIONS
1
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
4
Motor Screw
Motor Block
3
4.
CLOSEMOUNT INSTALLATION
(OPTIONAL)
a. Remove the canopy cover from the bottom of the
canopy.
b. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor housing. The larger
holes in the canopy will encompass the preinstalled
closemount screws. Secure the canopy to the top of the
motor housing with the closemount screws from the
hardware kit.
c. Hang the fan on the hook of the mounting bracket.
Proceed to Step 9.
2
Mounting
Bracket Screw
2. Remove the canopy from the mounting bracket
by removing the two mounting bracket screws from
the round holes in the canopy. Then loosen the other
two mounting bracket screws from the L-shaped slots.
Retain the mounting bracket screws for later. Install the
mounting bracket to the outlet box (not included) using
the screws and washers provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
3. Remove the motor screws from the underneath side of
the motor. Discard the motor blocks but keep the motor
screws for later.
If you wish to use the Downrod Mount (shown on page 3),
proceed to Step 5.
Closemount
Screw
Canopy
Mounting
Bracket
