7
Turn of the Century
TM
ASSEMBLY INSTRUCTIONS
Black
White
Bare/Green
Wire Connector
Black
Blue
White
Green
11
10
10. Raise the canopy, ensuring that the two mounting
bracket screws are aligned with the L-shaped slots in
the canopy. Then turn the canopy clockwise until the
mounting bracket screws are completely engaged in
the L-shaped slots. Install the two previously removed
mounting bracket screws and star washers in the round
holes. Securely tighten all mounting bracket screws.
11. Attach the blades to blade arms using the blade
screws and washers from the hardware kit.
9. Use wire connectors to connect the fan wires to the
power supply wires according to the wiring diagram and
the following instructions:
• Connect the white wire from the fan to the white (neutral/
common) supply wire.
• Connect the black and blue wires from the fan to the
black (hot/power) supply wire.
• Connect the green wire from the fan to the bare/green
(ground) supply wire.
Note:
If a second hot power wire is available from the
outlet box, connect it to the blue (light power) fan wire for
separate fan and light switches.
Important:
After the connections have been made, the
wires should be turned upward and pushed carefully
up into the outlet box. Place the black and white wire
connections on opposite sides of the outlet box.
9
Canopy
L-shaped
Slot
Round
Hole
Blade
Arm
Blade
Mounting
Bracket Screw
Blade Arm
Blade Isolator
Motor
12
12. Secure the blade arm and blade isolator to the
underneath side of the motor using motor screws
removed in Step 3. Completely secure each blade arm to
motor before moving to the next.
To install the fan without the light kit, skip to step 18
.
