8
Turn of the Century
TM
ASSEMBLY INSTRUCTIONS
14
13. Remove the three switch housing screws from the
bottom edge of the switch housing. Connect the single-
pin connectors from the fan to the single-pin connectors
from the light kit -- black to blue and white to white.
14. Secure the light kit to the switch housing using the
three switch housing screws. Then install candelabra base
bulbs (60W max.) into the sockets in the light kit.
13
Switch
Housing
Single-pin
Connector
Switch Housing
Light Kit
15
15. Remove the finial cap and finial from the bottom of
the light kit. Feed fan pull chain coming from the switch
housing down through the grommet in the lower part
of the light kit. Then, feed the pull chains through the
appropriate holes in the finial plate and the hole in the
finial. Lift the finial plate up until it is flush with the glass
shade. Screw the finial onto the threaded rod of the light
kit fitter.
Finial Cap
Finial
16. Attach pull chain extensions to the pull chains.
16
Pull Chain Extension