33 - 35
LANGER
EMV-Technik
DE-01728 Bannewitz
[email protected]
www.langer-emv.com
P1202 / P1301 L-ESD set
Operating Modes
9.6
Single Pulse
By pressing the
Single (Pulse)
button (Figure 26) the
BPS 203
will generate a single pulse with
the defined
Pulse Level
and
Polarity
. The
Status LED
of the
BPS 203
and the
LED
of the
connected field source will blink one time.
Figure 26: Active buttons: Start Pulsing and Single Pulse
Continuous Pulses
When the
Start (Pulsing)
button (Figure 26) is pressed, the
BPS 203
will generate continuous
pulses with the defined pulse parameters. Additionally the LED on the field source and the
Status
LED
on the BPS 203 will blink continuously. T
he software’s status will display
Status: running
and
the
Start (Pulsing)
button is renamed
Stop (Pulsing)
. The pulse frequency and voltage can be
changed at any time.
Depending on the
Counter
settings, the pulses remaining are displayed in the
Impulse Counter
box and are updated continuously.
Figure 27: Pulse counter at start up 10 pulses
remaining
Figure 28:
Pulse option counter after 5 pulses
Status Bar Messages
9.7
The status bar of the
BPS 203-Client
consists of:
1. The status of the
BPS 203
USB connection
-
Connection:
BPS disconnected
-
Connection: BPS connected
2. Status of the automatic probe recognition
-
No Probe detected
-
P
####
detected
