Langer & Laumann TSG Sinus Drive, Installation Instruction

Page: 18 / 27

18 / 27
9 User setting h-parameter
Tabelle 2: h-Parameter
Parameter Funktion Min.-
Wert Default-
Wert Max.-
Wert Faktor Einheit
hA Only for use with optional add on
boards (valid from version TSG V4).
01: control TSG Sinus Drive (us-
able with add on board TSG Si-nus
Drive)
03: control TSG Sinus Drive with
emergency power supply (usable
with add on board TSG Sinus Drive)
06: control TSG Sinus Drive for
shaft hinged doors (usable with add
on board TSG Sinus Drive)
16: CANopenLift- or ThyssenFx -
Bus-communication and TSG Sinus
Drive (usable with add on board
CAN and TSG Sinus Drive)
17: CANopenLift- or ThyssenFx -
Bus-communication and TSG Sinus
Drive with emergency pow-er supply
(usable with add on board CAN and
TSG Sinus Drive)
18: CANopenLift- or ThyssenFx -
Bus-communication and TSG Sinus
Drive for shaft hinged doors (usable
with add on board CAN and TSG
Sinus Drive)
00 00 05
h7 Opening time of the skate
00 00 80 [1/100 Se-
kunde]
hb Closing time of the skate
01 50 80 [1/100 Se-
kunde]
hC Pause between opening of the skate
and opening of the door 01 50 99 [1/100 Se-
kunde]
Note:
For more information on parameter setting see also the manual TSG door operator.