6
PROGRAMMING
OPTIONAL PROGRAMMING CODES
Below are codes which will configure the display to an optional readout or or aid in the operation of the
oven.
The readout must display "ENTER" before the computer will accept any programming code. If the readout
displays any other word, turn the oven Off then back On before beginning the programming sequence.
The control allows for a 3 second delay between each button push, if a delay of longer than 3 seconds has
occurred, the programming code must be re-entered.
The instructions call for pressing exactly what is shown under "PRESS", The following abbreviations are
used to indicate which buttons are to be pressed.
ABBREVIATION
MEANING
"1" through "0"
Product Buttons
"A" through "E"
Shelf Buttons
P
Any particular Product Button
Shelf
Any particular Shelf Button
R/C
Read/Clear Button
M/P
Manual Program Button
T
Temp Button
R/C HOLD
Hold the Read/Clear Button down until "88888" appears
on the Display
( )
Button to press after the display prompt changes
