11
TEMPERATURE SENSOR VALUES
SENSOR RESISTANCE
This measurement is taken after the Temperature Sensor is unplugged from the connector pins located on
the back of the control panel (see page 9). Do not take this measurement while the Temperature Sensor is
connected to the conrtol panel circuit board.
Resistance vs. Tem perature
Tem perature (deg. F)
Resistance (oh
m
500
600
700
800
900
1000
1100
1200
32
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
420
440
460
SENSOR VOLTAGE DROP
This voltage is measured at the Temperature Sensor connection located on the back of the control panel
(see page 9). Leave the sensor pluged onto the control panel and measure the voltage drop across the
connector pins while the oven is operating at temperature. Once a measurement is taken, remove the plug
from the connector pin and measure across the pins to confirm a 5 volt DC source. Do not fault the
Temperature Sensor if a 5 volt DC source is not present.
V oltage vs. Tem perature
Tem perature (deg. F.)
Volts D
1
1.2
1.4
1.6
1.8
2
2.2
2.4
70
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
