![background image](http://html.mh-extra.com/html/lang/gcco-c/gcco-c_service-manual_674627019.webp)
19
PROGRAMMING GCCO-C CONT’D
GCCO-C STATUS DISPLAY
The Status Display informs the operator of the oven's status.
It can be used as a countdown timer, shelf in use or internal oven temperature display during the
cooking cycle (see GCCO-C Programming Codes).
The Display informs the operator when the oven is ready to bake, or if the oven is above or below the
programmed temperature.
Below is a list of displays and their definitions:
"
ENTER
"
The oven is energized and ready for an operator command.
"
PrEht
" Stands
for
“PREHEAT”
. A product has been selected and the oven is
heating to the programmed temperature.
"
rEAdY
”
A product has been selected and the oven has preheated to the
programmed temperature. The oven is ready to load a product.
"
COOL
"
The oven's internal temperature is below what is programmed.
"
Hot
"
The oven's internal temperature is above what is programmed.
"
ShELF
"
A product selection has been made after the oven has preheated and the
computer is asking which shelf the product is placed on.
"
hELP
"
There is a fault in the control system, the computer will not operate until
service is performed.
"
Cont
" Stands
for
“CONTINUOUS”
. The oven has been programmed without a
time being entered. The oven will operate continuously at the
programmed temperature.
"
ErrOr
"
An entry has been made during the programming, which the computer
does not understand.
Summary of Contents for GCCO-C
