Lang GCCO-C, Service Manual, Page: 21 / 73

21
PROGRAMMING GCCO-PP
ACTION DISPLAY
Turn the power switch on. If the oven is already on,
press the Read / Clear key until the following screen
is displayed. SELECT PRODUCT OR
READ/CLEAR TO
PROGRAM
XX:XXPM XXXF
Enter access code “ 1 6 2 7 3 8”.
A: SET TIME
B: SET DATE
C: PROGRAM PRODUCTS
D: NEXT MENU
Select “C”. PRODUCT PROGRAM MODE
SELECT PRODUCT
NUMBER 1-9
Select a number from 0-9 and press the key
corresponding to that number.
EDIT PRODUCT?
1=EDIT OR 2=DELETE
NXX TX XXXF CX
XX:XX:XX PXXX F-XX
If a product Key selected already has a program, the
screen will read.
ENTER COOKING TEMP
100 TO 450 F
NOX T1 XXXF
Enter a desired cooking / baking temperature. The
screen will automatically advance to the next
display. ENTER COOKING TIME
HR:MIN:SEC
NOX T1 XXXF CO
Enter the cooking time and then press “E” to
advance to the next screen.
ENTER COOKING CURVE
0 TO 100%
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
Enter the desired cooking curve. (Refer to sections
6.3 and 6.7 for more detail) ENTER FAN SPEED
1=HI 2=LOW
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
Select Fan speed. (Hi=1700 rpm, Low=1400) ENTER FAN PULSE RATE
1 TO 100%
NOX T1 XXXF CXX
XX:XX:XX PXX F-XX
Select Fan Pulse rate. (0 to 100%). 0=off unless
calling for heat. 100=on at all time.
NOTE: Any number between 0-100 means that the
fan will be on that many number of seconds in a
100-second block. (E.g. 67%= on for 67 seconds in
a 100 second block)
CONTINUE TO TIER 2
1=YES 2=NO
NOX T1 XXXF CXX
XX:XX:XX PXXX F-XX
If your press 1 you will go through the same
sequence as outlined above. If you press 2 the next
display will automatically appear. A: SET TIME
B: SET DATE
C: PROGRAM PRODUCTS
D: NEXT MENU