13
7. OPERATION CONT’D
•
The MANUAL PROGRAM button is active only when the Status Display shows
"EntEr".
•
To operate the Manual Program feature press the
MAN PROG
button.
•
The Status Display will show
"000 F
".
•
Select the desired temperature using the Product Buttons
0
through
9
to a maximum
of 450 degrees.
•
Once a temperature is entered the Status Display will show "
0:00:00".
The control is
asking for a cooking time input.
•
Enter the desired cooking time using the Product Buttons
0
through
9
to a maximum
of 9:59:59.
•
If the program does not require a time, press the flashing
E
button when the Status
Display shows "
0:00:00".
The oven will run continuously at the programmed
temperature with the Status Display showing
"COnt".
•
No other buttons will be activated until the oven has reached the programmed
temperature.
•
Once the oven has reached the programmed temperature the Status Display will show
"rEAdY",
the buzzer will sound briefly and all Product Buttons which are
programmed at the same temperature will also flash.
•
To run the Manual Program, load the product to be baked.
•
Press the
MAN PROG
button, the Status Display will show
"ShELf"
and the shelf
lights will flash.
•
Press the Shelf Button(s) which corresponds to where the product is loaded in the
oven (
A
equals the top shelf).
•
When the product is finished baking the beeper will sound continuously, the Status
Display will show "
dOnE
", and a Shelf Button will flash indicating which shelf is to
be removed from the oven.
•
Press the flashing Shelf Button to turn the beeper off.
•
To erase a Manual Program press and hold the
READ/CLEAR
button until the Status
Display shows "
88888"
then release the read/clear button
Temperature Recall Button
When pressed, the
TEMP
button will show the actual oven temperature in the Status
Display.
