![background image](http://html1.mh-extra.com/html/lang/ecoq-ap-wb/ecoq-ap-wb_installation-operation-maintenance-and-troubleshooting_3589753011.webp)
12
7. OPERATION CONT’D
6.4 Control Panel Buttons
Product Buttons:
To select a product, simply push any of the programmed PRODUCT BUTTONS
which is labeled for the product you wish to cook.
Once a product button is selected, the oven will preheat to the preprogrammed
temperature.
The control will not allow the operator to select a shelf until it has reached its
programmed temperature.
The Status Display will show "
ShELF
", at that time press the SHELF BUTTON(S)
that match the shelf position(s) the product was placed on (A equals the top shelf, C
equals the bottom shelf).
If the product program is a MULTIPLE TIERED program, the operator has only one
opportunity to enter a PRODUCT and SHELF selection. The computer will not allow
a second selection during the cooking cycle (see separate PROGRAMMING
instructions).
When the product is done the Status Display will show "
DOnE
", the beeper will sound, and a Shelf
Button will flash indicating which product has finished baking.
Pressing the Shelf Button will turn off the beeper and allow the oven to continue
baking or go to stand-by with the Status Display showing "
REAdY
".
Shelf Buttons
The shelves are labeled A through C. A is the top shelf and C is the bottom shelf.
Each shelf is timed separately from the others.
Time Recall Button
•
To check the remaining cook time on a product that is baking, press the
corresponding Shelf Button, the Status Display will show the remaining time on the
cook cycle.
Manual Programming Button
•
The button on the control panel labeled
MAN PROG
is the MANUAL
PROGRAMMING button. Status Display will show.
•
“DOnE"
or the time for the next to time to done.
•
The Manual Programming (MAN PROG) Button allows the operator to create a
short-term program for one time products.
•
The program will be erased when the oven is turned off or the
READ/CLEAR
button
is pushed.