28
TYPICAL OPERATION CONT’D
ECCO-C
ACTION
RESULT
Turn power switch to ON.
Control panel comes on, display says
“
88888
”
and
then
“
ENTER
”
, motor starts.
Press a product button.
Display says
“
PREHT
”
(Preheat), oven begins to heat
to the programmed temperature.
Beeper sounds briefly.
Display
says
“
READY
”
.
Open the oven doors and load the product. Close the
door and press the product button again.
Beeper sounds briefly and display says
“
SHELF
”
.
Press the shelf button(s) which correspond to the
shelf positions which the product is loaded (A
equals the top shelf and E equals the bottom shelf).
Display shows a countdown timer and begins to
count toward zero.
Beeper sounds continuously.
Display
shows
“
DONE
”
, shelf button(s) flash.
Press the
flashing
shelf button(s).
Beeper stops. Display shows “
READY
” if no other
shelves carry product or resume count down for
shelves that still have product cooking.
Open oven door and remove the product, which
corresponds to flashing shelf button(s).
ECCO-PP
ACTION
RESULT
Turn power switch to ON.
Control panel comes on, display says
“SELECT
PRODUCT OR READ/CLEAR TO PROGRAM
.
Press a product button.
Display says
“PRODUCT X PREHEATING TO
XXX F”.
Motor starts and oven begins preheating
to the programmed temperature.
Beeper sounds briefly.
Display
says
“READY SELECT PRODUCT TO
START ”
.
Open the oven doors and load the product. Close
the door and press the product button again.
Beeper sounds briefly and display says
“SELECT
OVEN SHELVES PRODUCT X”
.
Press the shelf button(s) which correspond to the
shelf positions, which the product is loaded (A
equals the top shelf and E equals the bottom shelf).
Display shows a countdown timer and begins to
count toward zero.
Beeper sounds continuously.
Display
shows
“DONE PRESS SHELF BUTTON
X, REMOVE PRODUCT”
, shelf button(s) flash.
Press the
flashing
shelf button(s).
Beeper stops. Display shows “
READY
SELECT
PRODUCT TO START
” if no other shelves carry
product or resume count down for shelves that still
have product cooking.
Open oven door and remove the product, which
corresponds to flashing shelf button(s).
Summary of Contents for ECCO-T
