Lang ECCO-AP, Service Manual

Page: 8 / 73

7
START-UPS
ECCO-AP / ECCO-C / ECCO-PP / ECCO-PT / ECCO-SII / ECCO-T
Convection Oven Start-Up
1) Verify connections at plug and terminal block
2) Incoming Volt - Single Phase L1-L2______
Three Phase
L1-L2______ L2-L3______ L3-L1______
3) Amp draw L1______
L2______
L3______
4) Motor amp draw ______
5) Are programs correct? Yes No
6) Verify actual temperature at 350
°
F ________
°
F.
Note:
Install thermocouple wire in center of oven cavity.
Let oven cycle off and on 3 times before recording temperature.
Set manual program in the computer for 350
°
F
Model #_______ Date_______ Serial #________
Store #___________ Tech Name___________________
Contact_______________ Company _________________________
Store Phone #___________ Service Company Phone #______________
Address_____________________
______________________
______________________