Lang ECCO-AP, Service Manual

Page: 30 / 73

29
TYPICAL OPERATION CONT’D
ECCO-C TYPICAL OPERATION SEQUENCE
ACTION RESULT
Turn power switch to ON. Control panel comes on, display says “
88888 88888 88888 88888
” and
then
“
ENTER
ENTER ENTER
ENTER
”
, motor starts.
Press a product button. Display says “
PREHT PREHT PREHT PREHT
” (Preheat), oven begins to
heat to the programmed temperature.
Beeper sounds briefly. Display says
“
READY
READY READY
READY
”
.
Open the oven doors and load the product. Close the
door and press the product button again. Beeper sounds briefly and display says “
SHELF SHELF SHELF SHELF
” .
Press the shelf button(s) which correspond to the
shelf positions which the product is loaded (A
equals the top shelf and E equals the bottom shelf). Display shows a countdown timer and begins to
count toward zero.
Beeper sounds continuously. Display shows
“
DONE DONE DONE DONE
”
, shelf button(s) flash.
Press the flashing shelf button(s). Beeper stops. Display shows “
READY
READY READY
READY
” if no other
shelves carry product or resume count down for
shelves that still have product cooking.
Open oven door and remove the product, which
corresponds to flashing shelf button(s).
ECCO-PT TYPICAL OPERATION SEQUENCE
ACTION RESULT
Press the on switch. Control panel comes on, display says
“LANG, Run
Oven, Time Date Program .
Select “Run Oven”. Display will show a list of product to choose.
Select Product button next to Icon desired. Display says
“Preheating to XXXF”.
Beeper sounds briefly. Display says “Ready”.
Select Product to start. Display shows possible product selection for that
temperature.
Select Product to start. Display says “Select shelf”.
Press Product button next to desired shelf. Display will show icon chosen and begin to count
down.
Beeper sounds continuously. Display shows “ DONE” press button and remove
product from that shelf.
Oven is ready for another product.