Operation
cont'd.
16
Setting the Temperature Unit
This setting allows the operator to change from Fahrenheit (F) to Celsius (C).
Use the Up or Down arrow to toggle between Fahrenheit (F) and the Celsius (C) display and
Enter to save the changes.
Setting Fixed Set Point Temperatures
Fixed set point temperatures provide for a more reliable temperature setting when normal
procedures call for only one temperature setting per section all day long. If set points are
changed “On-the-Fly”, for special Products and the operator forgets to change settings back to
normal values, The control will remove the “On-the-Fly” changes at midnight. Setting up “Fixed
Set Points” starts with section 1. Use the UP and DOWN arrow buttons to adjust the
temperature. Press the ENTER button to move to the next section. When the last section’s
temperature is set, pressing the ENTER will save the new set point values. The control will
then prompt to set the clock.
Day Part
“Day Parts” provide for a reliable means of setting temperatures when normal procedures
require the use of multiple temperature settings per section throughout the day As many as six
different “Day Parts” can be defined. If set points are changed “On-The-Fly”, for special
products and the operator forgets to change the settings back to the normal values, the control
will remove the “On-the-Fly” changes at the beginning of the next “Day Part”.
Setting up “Day Parts” begins with the control indicating the number of currant “Day Parts”
setup and prompting for the user to indicate whether “Day Parts” are to be edited or deleted.
Use the UP or DOWN arrow buttons to indicate EDIT or DELETE then press ENTER.
If EDIT is selected and no “Day Parts” currently exist, the control asks if a new “Day Parts” is to
be added. Use the UP or DOWN to toggle between YES and NO then press ENTER. If YES is
selected the control displays the new “Day Part” number (1-6) and prompts for setting the “Day
Part” start time. Once the start time is set the control indicates the section number, the “Day
Part” number, and a temperature value. Use the UP and DOWN arrow buttons to adjust the
temperature value then press ENTER to advance to the next section. When all of the
temperature set points have been adjusted and entered, the controller either asks if the user
wants to add another “Day Part” or immediately prompts for setting the clock if six “Day Parts”
have been setup.
If EDIT is selected with existing “Day Parts”, the control displays the first “Day Parts” start time.
Use the UP and DOWN to adjust the start time. Once the start time is set the control indicates
the section number, the “Day Part” number, and a temperature value. Adjust start times and set
point temperatures as indicated above. When all existing “Day Parts” have been updated the
control asks if a new “Day Part” is to be added. If YES is selected add “Day Parts” as indicated
above. If NO is selected the controller will prompt for setting the clock.
If DELETE is selected the control will go through the existing “Day Parts” one at a time asking if
the user wishes to delete the displayed “Day Part”. Use the UP and DOWN arrows to select
YES or NO and press ENTER.
Notice
In order for the Day Part feature to work properly, you must set the two-start time. If
only one start time is set, the control will use this setting as the default temperature
setting. If the temperature is changed anytime during the Day Part, the control will
revert to the Day Part temperature at the appropriate time set for that “Day Part”.