Retrofit kit for dial indicator test devices
ed. 01/2017
page 12
Fig. 7: Positioning of camera and lighting unit
Finally, you may already do a first vertical positioning of the camera/lighting unit slide (4):
Take hold of the handle (5) with your right hand, and loosen the clamp (3) with your left hand. Now you
can move the slide in vertical direction, finding a position where camera, lighting unit and the dial gauge
to be tested are all in line. Fix the slide in this position by tightening the clamp (3).
ATTENTION:
Do not let go of the handle while the clamp is unfastened to avoid the risk of a collision of the slide with
the stopper!
