L&W Compressors LW 300 EC III Operating Instructions Manual Download Page 67

Page: 67 / 228

Page A - 65

LW 300 EC III / LW 450 EC III
Version: 24.04.18-001 E

M A I N T E N A N C E A N D S E R V I C E

Safety valve test

Safety valve test as follows:

• Disconnect compressor from the electrical power supply

and protect against unexpected restart.

• Remove the cover of the switch box.

• Switch on the "Test Safety Valve" switch (pressure switch

will be deactivated!).

• Mount the cover of the switch box.

• Connect the compressor to the electrical power supply.

• Close filling valves.

• Start the compressor.

• Watch the final pressure gauge. The safety valve should

open when reaching working pressure of the compressor.
If not, switch off the unit and take out of service until the
safety valve has been replaced.

• Switch off the compressor (

compressor vented

• Disconnect the compressor from the electrical power

supply and protect against unexpected restart.

• Remove the cover of the switch box.

• Switch off the "Test Safety Valve" switch (pressure switch

will be activated!).

• Mount the cover of the switch box.

• Connect the compressor to the electrical power supply.

The safety valve test is now completed.

Note

Do not fill any tank during test phase!

Switch box

Safety valve test switch (up)

Summary of Contents for LW 300 EC III





































































































































































































































Search results

Summary of Contents for LW 300 EC III

Reviews:

L&W Compressors LW 300 EC III, Operating Instructions Manual, Page: 67 / 228

Search results

Summary of Contents for LW 300 EC III

Reviews: