L&W Compressors LW 300 EC III Operating Instructions Manual Download Page 164

Page: 164 / 228

Version: 24.04.2018

A U T O M A T I C C O N D E N S A T I O N D R A I N

Oil / water separators final stage

Oil / water separators final stage - maintenance

Change/clean oil / water separators final stage as follows:

• Loosen pipe connections and mounting screws.

• Remove oil / water separators.

• Open ring nut and remove separator top (Fig. 1).

• Loosen nut at the separator top.

• Change sinter filter (Fig. 2).

• Reassemble all parts and tighten nut.

• Change o-ring, previously grease new o-ring (Fig. 3).

• Place separator top and tighten ring nut manually.

• Replace silencer.

• Mount oil / water separators.

• Tighten pipe connections and mounting screws.

The oil / water separator maintenance is now completed.

Fig. 1 - Loosen ring nut

Fig. 3 - Change o-ring

Fig. 2 - Change sinter filter

Note

Clean all parts thoroughly before assembly.

D - 17

LW 300 - 450 E Compact III

Summary of Contents for LW 300 EC III





































































































































































































































Search results

Summary of Contents for LW 300 EC III

Reviews:

L&W Compressors LW 300 EC III, Operating Instructions Manual, Page: 164 / 228

Search results

Summary of Contents for LW 300 EC III

Reviews: