L&W Compressors LW 300 EC III Operating Instructions Manual Download Page 51

Page: 51 / 228

Page A - 49

LW 300 EC III / LW 450 EC III
Version: 24.04.18-001 E

M A I N T E N A N C E A N D S E R V I C E

Oil / water separator 1st stage - maintenance

Change / clean oil / water separators 1st stage as follows:

• Loosen pipes and mounting screws.

• Remove oil / water separators.

• Open ring nut and remove separator top (Fig. 1).

• Open nut and remove separator top (Fig. 2).

• Change sinter filter (Fig. 3).

• Reassemble all parts and tighten nut.

• Change o-ring, previously grease new o-ring (Page 51, Fig. 4).

• Place separator top and tighten ring nut manually.

• Remove the base ring (Page 51, Fig. 5).

• Change o-rings, previously grease new o-rings (Page 51, Fig. 6).

• Remove the connection of the base ring and change the sinter

filter (Page 51, Fig. 7).

• Reassemble the connection.

• Mount the base ring.

• Mount oil / water separator.

• Tighten pipes and mounting screws.

Oil / water separator maintenance is now completed.

Note

Clean all parts thoroughly before assembly.

Fig. 1 - Open ring nut and remove

separator top

Fig. 2 - Loosen nut at the separator

top

Fig. 3 - Change sinter filter

Summary of Contents for LW 300 EC III





































































































































































































































Search results

Summary of Contents for LW 300 EC III

Reviews:

L&W Compressors LW 300 EC III, Operating Instructions Manual, Page: 51 / 228

Search results

Summary of Contents for LW 300 EC III

Reviews: