L&W Compressors LW 300 EC III Operating Instructions Manual Download Page 165

Page: 165 / 228

Version: 24.04.2018

Leak test

Leak test as follows:

• Disconnect the compressor from the electrical power

supply and protect against unexpected restart.

• Remove the cover of the switch box.

• Switch on the leak test switch (solenoid valves will be

deactivated!).

• Mount the cover of the switch box.

• Connect the compressor to the electrical power supply.

• Close filling valves.

• Start the compressor.

• Switch off the compressor at a pressure of approx. 150

bar.

• Verify the compressor for release noises. (A slight hiss of

the air inlet filter nozzle can be ignored). If release noises
occur, localise blow off position(s).

• Switch off the compressor.

• Disconnect the compressor from the electrical power

supply and protect against unexpected restart.

• Remove the cover of the switch box.

• Switch off the leak test switch (solenoids will be acti-

vated!).

• Mount the cover of the switch box.

• Connect the compressor to the electrical power supply

(

compressor vented

The leak test is now completed.

Note

Do not fill any tank during test phase!

Switch box

Leak test switch (lower)

A U T O M A T I C C O N D E N S A T I O N D R A I N

D - 18

LW 300 - 450 E Compact III

Summary of Contents for LW 300 EC III





































































































































































































































Search results

Summary of Contents for LW 300 EC III

Reviews:

L&W Compressors LW 300 EC III, Operating Instructions Manual, Page: 165 / 228

Search results

Summary of Contents for LW 300 EC III

Reviews: