Landoll VT PLUS 7430, Operator'S Manual

Page: 51 / 84

3-12 CONDITIONER REEL INSTALLATION
3-12.1 Install connex bushing into pivot hole of
17" heavy spring (See Figure 3-23) .
IMPORTANT
THE CONNEX BUSHING IS LOCATED INSIDE
HEAVY SPRING ASSEMBLY AND MACHINERY
BUSHINGS ARE ASSEMBLED TO OUTSIDE OF
REEL ARM.
3-12.2
Assemble 1 x 8 adjustment bolt through
adjustment pin on frame, 1" lock washer, (2)
1-8 hex nuts, and 17" heavy spring assem-
bly.
3-12.3 Install 1-1/2" flange bearing into reel
arm. Slide in 1-1/2" pivot bushing.
3-12.4 Attach reel arm to upper hole on rear
center or wing frame or double mount using
1-8 x 6-1/2 hex head cap screw and hex lock
nut.
3-12.5 Assemble 17" heavy spring assembly to
reel arm using 1" pivot pin, machinery bush-
ings, and 5/16 x 1-1/2" spring slotted pins.
Set pin centers to 20-3/4" dimension as
shown in
Figure 3-23 .
WARNING
DO NOT ATTEMPT TO LIFT HEAVY
PARTS (SUCH AS THE FRAME, DISC
G A N G S , L I F T , P U L L H I T C H , O R
REEL/GANG BAR ASSEMBLY MANU-
ALLY. USE A HOIST OR A FORKLIFT
TO MOVE THESE PARTS INTO POSI-
TION.
3-12.6 Attach reel/gang bar assembly to reel
arms using gang bar mount plate, 3/4-10 x 5
hex head cap screws and hex lock nuts. Re-
fer to
pages 2-6 - 2-11 for reel/ gang bar
placement locations.
3-31