3-6
FOLD CYLINDER MOUNT
3-6.1
For 23’ models, assemble the fold cylin-
der mount to the rear cross bar where the
center rear gangs meet using 5/8 x 4 x 6-1/2
u-bolts and hex lock nuts
(See Figure 3-6)
3-6.2
For 26’ models, assemble the fold cylin-
der mount to the middle cross bar of the cen-
ter frame (over the leveler spring assembly)
using 5/8 x 4 x 6-1/2 u-bolts and hex lock
nuts
(See Figure 3-6)
.
3-6.3
For 29’ models, assemble two fold cylin-
der mounts to the middle cross bar of the
center frame (over the leveler spring assem-
bly) , and the other mount over the rear
cross bar where the center rear gangs meet
using 5/8 x 4 x 6-1/2 u-bolts and hex lock
nuts
(See Figure 3-6)
3-6.4
For 33’ models, assemble two fold cylin-
der mounts to the center frame using 5/8 x
4 x 7-3/4 u-bolts and hex lock nuts.
Place
one mount on the middle cross bar over the
leveler spring assembly, and the other mount
over the rear cross bar where the center rear
gangs meet.
See Figure 3-7
for proper
placement.
Position
both
fold
cylinder
mounts so that the hose loops point forward.
3-13
33 fold cyl bracket
5/8-11 HEX
LOCK NUT
FOLD CYLINDER
MOUNT
5/8 X 4 X 7-3/4
U-BOLT
33’ MODEL
LOCATION
ON
’ MODEL
S
33
58-7/16
Figure 3-7 33' Fold Cylinder Mount Installation
Summary of Contents for VT PLUS 7430
