Landoll Till 'N Seed BPS6, Operator'S Manual

Page: 21 / 58

OPERATION
2-7
Seed Rate
Refer to Seed Chart on the Front Seedbox Cover to
determine range for Seeding Rate. It should be used as a
general guide only, because of seed size variation and
cleanliness. A more accurate Seed Rate can be
determined by Calibrating the Seeder, see Seed Rate
Calibration in this section.
• To install sprockets for the required range, remove the
Klik Pin and change the Driver and Driven Sprockets
accordingly. Also, refer to decal on the inside of the
Transmission Cover.
Disengage or Engage Seeding:
• To disengage seeding, remove Klik Pin and store it in
the hole provided in the end of the shaft.
• To engage seeding, re-install the Klik Pin into the
sprocket and shaft.
Figure 2-7: Seed Rate
6SURFNHW6WRUDJH
5HPRYH.OLN3LQ
WRFKDQJH6SURFNHW
/RZ5DQJH7RRWK
0LG5DQJH7RRWK
+LJK5DQJH7RRWK
'ULYHU6SURFNHW
5HPRYH.OLN3LQ
WRFKDQJH6SURFNHW
/RZ5DQJH7RRWK
0LG5DQJH7RRWK
+LJK5DQJH7RRWK
'ULYHQ6SURFNHW
(QJDJH3RVLWLRQ
'LVHQJDJHG3RVLWLRQ
.OLN3LQ